WEEK 14 : FINAL PRESENTATION

بِسۡمِ ٱللهِ ٱلرَّحۡمَـٰنِ ٱلرَّحِيمِ 

FYP II

Week 14

Title: final presentation

 Description: today is a final week for preparation before presentation. before that i present my project to my supervisor to guide me and do the best i can. Grateful, its successfully function. the accessor that will be access and judge during my presentation is Mr.hj Ahmad basri and Mr. Suhaimi. thank you very much Sir Halim for your guide, advice and help during this two semester. 

WEEK 13 :PREPARATION OF FYP II PRESENTATION DAY

 بِسۡمِ ٱللهِ ٱلرَّحۡمَـٰنِ ٱلرَّحِيمِ 

FYP II

Week 13 

Title: Preparation for FYP II presentation day.

 Objective: Doing preparation before presentation day about a week.  study about the project the project  and also do other research for extra acknowledgement. i already design my final poster after discussion with my supervisor. further more, make sure the project function until for presentation day.

Result :

after consult with my supervisor, he suggest to me there is no need to be use  a logo soft as a interfacing. so i need to changed my block diagram and some other part.

WEEK12 : TESTING THE SOLAR TRACKER PERFORMANCE

بِسۡمِ ٱللهِ ٱلرَّحۡمَـٰنِ ٱلرَّحِيمِ

FYP II

Week 12

Title: Testing performance

Objective: To testing the solar tracker function, movement, and voltage charge

Content/Procedure: the solar tracker is tested under a sun light . testing location is at UNIKL BMI football field. 

Result & Analysis:

solar tracker at football field to generate electricity 

result for voltage vs time

WEEK 11: TESTING THE LDR AND DC MOTOR

بِسۡمِ ٱللهِ ٱلرَّحۡمَـٰنِ ٱلرَّحِيمِ 

FYP II

Week 11

Title: testing the LDR and  DC motor performance

Objective: Testing the LDR performance and motor movement

Content/Procedure: LDR performance is testing by adjusting the variable resistor.The reading value of LDR is is take in two position (when LDR  is on the light and when LDR is on the shade)

and observe the DC motor movement. 

Result :

FIXED RESISTOR	Vout (LDR on light)		Vout (LDR on shade)	Voltage Change (V)
15k 3.2k	9.28               8.9		8.19 8.19	0.99 3.24
2k	8.88		5.66	3.48
1k	8.16	5.4		4.25
500	7.14	3.87		4.74
300	6.55	2.4		5.21
200	4.13	1.34		3.2
100	3.34	0.9		2.78

CONDITION	MOTOR DIRECTION
LDR1> LDR2	LEFT
LDR1< LDR2	RIGHT
LDR1= LDR2	STATIC
LDR1> LDR2	RIGHT
LDR1<LDR2	LEFT

WEEK 10 : HARDWARE AND ELECTRONICS PART

                                          بِسۡمِ ٱللهِ ٱلرَّحۡمَـٰنِ ٱلرَّحِيمِ

FYPII

Week 10

Title: Connect hardware to electronics part

Objective: Finish wiring all component and circuit. 

Content/Procedure: All circuit and wire is connect to the hardware. some jumper need to use in this part and soldering the wire. 

Result :

WEEK 9 : HARDWARE WELDING

                                                                     بِسۡمِ ٱللهِ ٱلرَّحۡمَـٰنِ ٱلرَّحِيمِ 

FYP II

Week 9

Title: welding the hardware design

Objective: To make sure the hardware part is build/ welding according to the design.

Content/Procedure: the metal/rod and some of screw is use for this part. the DC motor is welding attach to this design. i use black colour to paint this hard ware.

Result & Analysis:

Conclusion: the hardware is function completely according to the design

WEEK 8 :SOLAR TRACKER HARDWARE DESIGN

                                                                   بِسۡمِ ٱللهِ ٱلرَّحۡمَـٰنِ ٱلرَّحِيمِ 

FYPII

Week 8

Title: Proposed the Solar tracker hardware design

Objective: To ensure the solar tracker can stand any weight that will be use

Content/Procedure:

The design being made using scatch up 2010 tool to get the idea on how the hardware will be present on the Industry Day. So here I enclosed the design for solar tracker to proposed the project advisor for further information.

Result & Analysis:

Proposed Design Model for Solar Tracker

Figure 1: top view

Figure 2 : overall design

Conclusion:

The design of the hardware of solar tracker well accepted and done.